![]() ![]() b) Using a socket hexagon wrench 5, tighten the 3 nuts.ĩ. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER FRONTġ0. INSTALL NO. 1 COWL TOP TO COWL BRACE INNER 11. INSTALL WIPER LINK ASSEMBLY 12. l)Ħ. INSTALL AIR CLEANER CAP SUB-ASSEMBLY 7. CONNECT VACUUM HOSE 8. INSTALL V-BANK COVER SUB-ASSEMBLYĪ) Fit the 2 retainers and install the V-bank cover. The engine kept the 83.0 mm stroke, but it has increased bore size in order to achieve its 3.3-liter displacement. G) Install the pressure feed tube with the 2 nuts. The 3MZ-FE was equipped with a forged steel crankshaft with four main journals, forged connecting rods, and aluminum alloy pistons with a resin coating on the piston skirts for friction reduction. b) Install the intake air surge tank and the emission control valve bracket with the 2 nuts.Ĭ) Using a socket hexagon wrench 8, tighten the 4 bolts.ĭ) Install the No. 2 surge tank stay with the 2 bolts.Į) Install the No. 1 surge tank stay with the 2 bolts.į) Install the No. 1 engine hunger with the 2 bolts. Seal packing: Part No. 08826-00080 or equivalentĬ) Using an E6 "Torx" socket wrench, install the engine wire harness protector with the 2 bolts.Ī) Install a new gasket to the intake air surge tank. Install the cylinder head cover within 3 minutes after applying seal packing.ĭo not start the engine within 2 hours after installing.ī) Install the cylinder head cover with the 9 bolts. Tighten the bolt uniformly in several steps.Ĭ) Install the engine wire harness with the 3 nuts.Ģ. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY LHĪ) Apply seal packing to the cylinder head as shown in the illustration. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |